Oasis Washing Machine Cabinet

Material Specification
Structure: 1,8cm-thick and made up of wood-particle panels.
Fronts: 1,8cm-thick and made up of wood-particle panels (for melamine) or MDF panels (for lacquer).

Technical Specification and Equipments
Structure: bottomless, the base is equipped with 4 structural bars in aluminium plate th. 0,2 cm, that joint the two side planes; the rear bars and the upper front bar have an L-section with overall measurement cm 2x2; the front bar is cm 6 and has a flat section to facilitate the insertion of the washing machine. The backrest is free to allow the passage of drainpipes.
Doors: equipped with hinges with integrated slowing system for a softer and quieter closing.

Optional
Splashback panel: to complete the bathroom furniture with stone or stratified melamine top; particularly recommended for walls which are not perfectly perpendicular, and to support an upper mirror.

Assembling Tips
With the independent position the washing machine cabinet base must be fixed on the wall with brackets (not included).

Maintenance
Melamine: for maintenance, you can simply use a neutral detergent. To clean the limestone stains you can use sponge soaked in vinegar or any specific product, then rinse and dry. Do not use acids, abrasive products or powders; do not let anti-limescale products in contact with the surface for a prolonged period of tame, as they may cause marks.
Lacquer: we recommend using soft cloths to avoid damaging the surface. Do not use products containing solvents, acetone nor wax-based, alcohol-based products nor silicones.
Gres: to prevent stains, clean promptly with a damp cloth or neutral detergents. The use of neutral detergents is recommended.
QTOP: unlike marble-resin, mineral filler is not chemically attackable by acids, the products recommended for cleaning should not have high alkalinity (basic PH), which could alter, mainly cosmetically, the binding resin. The best way to prevent stains is to remove the soiling agents promptly with a damp rag or neutral detergents before they harden.

For further information
Mineralguss: is a material made of calcium carbonate and trihydrates of aluminium, bonded by a small percentage of polyester resin. The surface is covered by a gelcoat film that offers an excellent physics-chemical resistance. The compound is ductile and heat-resistant. Possible colour variations due to high temperatures can be cleaned with a slightly abrasive sponge and subsequent polishing.
To clean you can use a sponge with water and a classic cream detergent. The top surface shouldn't come in contact with solvents or alkaline lotions such as ammonia. Products for hair dying shouldn't stagnate in the basin and must be immediately washed off. Do not fill the washbasin with more than 60°C water.
Crystallite: it is made up for the 80% of quartz, the hardest and most refined component of granite. The quartz is mixed with a high quality acrylic resin to obtain a long lasting material that is resistant to accidental damage and dirt.
Gres: porcelain stoneware is obtained from a mixture of water and clay which is transformed, through the raw extrusion process, into a slab with extraordinary mechanical properties. The vitrification closes the pores, ensuring maximum resistance to the absorption of water and stains.
QTOP: is a quartz-resin product consisting of natural materials (quartz and granite) and a high-quality binding agent, supplemented with coloured pigments and glass or mirror granules.