FreeHand 12
Wall Mounted Wall System

Freehand 12 suspended wall unit with swiveling TV stand, suspended storage units, shelves and open compartments. Also in lacquered metal.

* Required Fields


From €6,216.00
Wishlist

Description

FreeHand 12 is a suspended wall unit with boiseries full of storage units, shelves and open compartments. The boiserie panels, available in many finishes, from an elegant backdrop to the metal shelves and the swivelling TV stand element, creating a material surface that is pleasing to the eye. The possibility of swivelling the TV set is a real added value and makes FreeHand 12 very suitable even in large and spacious living rooms, perhaps with a sofa in a corner position or off-centre with respect to the wall itself.
The storage units alternate between suspended base units with drawer and wall unit with drop-down opening. The structure of the storage units is characterised by the delicate 45° machining between the sides and the upper and lower panels, while the open wall unit is made with a tubular metal structure. The play of solids and voids is further accentuated by the offset between the drop-down wall unit and open wall unit, which is contrasted at the opposite end of the wall unit by the four metal shelves.
FreeHand 12 expresses vitality and energy thanks to the suspended elements and the available finishes, with which it is possible to create a modern and bright mix of combinations and contrasts.

Features
Wood panelling system available in numerous finishes
metal TV stand with swivelling support 
Storage units with drawer and drop-down made with 45° machining
Linear metal shelves with machined edge
Open wall unit with metal structure
Manufactured with valuable material contrasts and colour combinations

Materials and Finishes
- matte / metallic lacquer
- MDF compact
- wood veneer
- matte lacquer metal
- clear glass

Purchasing Information
The total size of the composition in the photo is cm 352 d.44,2 h.160; measurements are approximate and depend on the actual arrangement of the elements.

Technical study

Specific Measurements
n.1 base unit with basket: cm 128 d.44 h.32
n.1 base unit with basket: cm 96 d.44 h.32
n.1 drop-down wall unit: cm 96 d.44 h.32
n.4 metal shelves: cm 57,6 d.22 cm th.0,3
n.1 open wall unit: cm 96 d.32 h.32
n.1 adjustable TV stand: cm 4 d.15 h.116,5

Technical Specifications and Equipment
Base and Wall Unit Structure: extralight E1 particle board panel veneered with real wood veneer or coated with polyester resin and lacquered. Visible edges in real wood veneer, thickness 0.1 cm, or lacquered polyester resin, thickness 0.1 cm. The Compact MDF containers are made of recycled eucalyptus mircroparticle panel coloured with organic E1 water-repellent colours. The backrests are made of slate lacquered MDF.
Shelves: in metal with iron wax finish or lacqered cm 57,6 d.22 cm th 0.3.
Doors and Fronts: the wood veneer fronts are made of Compact MDF, i.e. recycled eucalyptus micro-particle board coloured with organic dark grey E1 water-repellent and veneered with real wood. The edges with perimeter rebate on the fronts are exposed Compact. The matte lacquered fronts are made of HD mdf coated with polyester resin and matte lacquered in 4 coats. Edges with perimeter rebate so that the closed front is thin (only 0.6 cm), with a total thickness of 2 cm. Perimetrically the front is reduced by 0.5 cm per side with respect to the cabinets.
Internal Shelves:  Hinged wall units (including showcases) include a 0.8 cm thick transparent crystal glass internal shelf. 
Drawers / Baskets: 4 sided perimeter box in birch plywood stained grey, thickness 1.2 cm. Bottom in MDF or E1 wood particle board covered with fabric-effect melamine material, 1 cm thick. Blum invisible runners with ball-bearing partial extension and push-pull opening.
Boiserie: A patented 3D boiserie composed of horizontally positioned 2 cm thick slats, fixed to the wall by means of a rack. The technical space between panel and wall (and the consequent depth of the entire composition with respect to the wall behind) is adjustable in three positions: 5.5 cm, 6 cm and 6.5 cm. This feature also makes it possible to have a "dynamic" wall with individual slats placed side by side but with different depths between them.
Open compartment and Showcase Structure: the structure is made of tubular section 2 x 2 cm in waxed iron or matte lacquered finish. Shelves and dividers, 1.6 cm thick.
TV Stand Rod: equipped with swivelling arm with double joint and Vesa plate for attaching from 42" to 56" TV sets. Complete with rack coupling for paneling. The TV position is height adjustable. 

Optional
LED Lighting: recessed LED bars with a 1.1 x 1.1 cm section positioned on the upper (24W) and lower (12W) sides, made of opal polycarbonate with uniform diffusion - 3000K - 26W (total) including power supply with optional remote control.

Video

Additional Information

Area of Production
Italy
Assembling
Medium Assembling
Cubic Metres
1,48 m³
Other Products from the same Collection
View all the products of the collection (cod.fmr)

Partner Factory

This item is crafted by a firm from Brianza district (Northern Italy) specialised in the production of adjustable TV units, bookcases and beds coming with a great value for money. Precious finishes and natural materials well represent this modern and original collection, each product is crafted by keeping in mind the needs of contemporary living arrangements as well as by using techniques which fully respect the environment. Bespoke solutions and modular layouts allow you to create unique and personalised furniture for your living room and bedroom, ensuring an optimal and original organisation of the space at disposal.
Starting from the design steps up to the selection of the materials, each phase of the manufacturing process respects the highest standards of quality proper of every Made in Italy product. The hand-crafted tradition - typical of Brianza district - is put to life thanks to the hands of master craftsmen, able to transform each item in a unique and refined piece. The firm also invests a lot in the research and development field, always trying to find the most innovative and technologically advanced solutions; the numerous patents registered are a demonstration of that.

Unique customisable furniture solutions for living rooms and bedrooms

You may also like