Atlantic Countertop D.37
Bathroom Vanity

Atlantic D.37 slim bathroom vanity with countertop washbasin. Up to 120cm with handles, recess grips, groove handles or push-pull system. Doors, drawers and deep drawers.

* Required Fields


From €533.01
Wishlist

Description

Atlantic D.37 is a slim bathroom vanity with a countertop washbasin. The storage below features doors, drawers or a deep drawer, which are either 37,5 or 50 cm in height. This vanity also comes in a suspended, wall-mounted version or in a floor-standing version with legs. Atlantic is highly customisable, both in size and material, as there are various material options for the cabinet and for the countertop, which is available in a range of finishes and thicknesses.
There are several countertop washbasins to choose from, allowing you to choose a model which best suits your wants and needs. You can also choose between handles, groove handles, recess grips or a push-pull system for the drawers and cabinet doors.

Characteristics
wall-mounted or floor-standing with h.20cm legs
37cm in depth, making it an ideal choice for smaller bathrooms
highly customisable
wide range of countertop washbasins to choose from

Models and Measurements
Models: bathroom vanity with 2 doors, 3 doors, 1 deep drawer, with 2 drawers, 2 doors and 2 drawers
Width: cm 70 / 85 / 95 / 100 / 105 / 120
Depth: cm 38
Height:
- wall-mounted (suspended): cm 37,5 / 50 + th. top
- floor-standing: cm 70 + th. top

Materials and Finishes

Base:
- melamine
- lacquer: matt / on melamine / metallic / sandblasted / glossy
- wood veneer, open-pore lacquered wood
Top:
- melamine
- lacquer: matt / on melamine / metallic / sandblasted / glossy
- wood veneer, open-pore lacquered wood
- stone / gres
- tekor resin

Purchase Information
The top protrudes by 1 cm at the front and by 0,5 cm on each side: the depth of the base itself is reduced by 1cm; the total width of the bathroom vanity unit is also 1cm more than the measurement indicated.
The total height of the unit is the sum of the height of the base, the thickness of the top and the height of the washbasin.

The washbasin is central in relation to the width of the base section.
The washbasin can only be positioned off-centre for the larger 105 / 120 cm bases, in which case it can be placed on the right or the left of the washbasin cabinet; in this case, the basin will be approximately 2 cm from the edge of the washbasin cabinet.

The tap is not included; Among the products at the bottom of this page, you can find the Universal Siphon and the Waste Drain for basins with an overflow hole.
At the bottom of the page you can also find Additional Sides, to be added to the bathroom vanity unit to create a frame matching the top.

Atlantic Countertop also offers the possibility to purchase the base section without the washbasin: it is then necessary to indicate the Make and Model of the washbasin which will be used and to send a technical diagram, so that we can create a hole in the countertop with the correct measurements. Additionally, please indicate whether the mixer will be placed on the washbasin, the wall, or the countertop. If the mixer is to be placed on the countertop, please also specify where it should be positioned in relation to the basin.

Technical study

Specific Measurements
Base section with 3 door of cm 85: n.1 central door of cm 35 + n.2 side doors of cm 25.
Base section with 3 doors of cm 95: n.2 doors of cm 35 + n.1 side door cm 25.
Base section with 3 doors of cm 105: n.3 doors of cm 35.

Material Specifications
Structure: 1,8 cm thick panels made from particle wood.
Fronts: doors, drawers and basket made of cm th.1,8 particle wood panels. The front finish in the smooth lacquered version is made of MDF with a thickness of cm 1,9.

Technical Specifications and Equipment
Structure: features an open back to allow space for the drains
Legrabox Drawers / Deep Drawers: metal frame with straight sides both internally and externally, 1.28cm thick. Equipped with full-extension metal runners and soft-closing system.
Doors: equipped with Smoove soft-closing hinges.
Handles: there are several handle models to choose from, as well as a push-pull option.
The cod. 152, cod.16 and groove handles are all available in a matt lacquer finish in all the colours displayed in the samples page.
Recess grip handles only available with melamine and matt lacquer finishes. Groove handles only available with wooden (except for 306 Smoky Walnut) and lacquer finishes. The mod.68 handles protrude by 4cm from the surface of the door.
Legs: cm 2 x 2 h.20 available in brushed nickel or matt lacquer in any colour from the material samples page; The h.50cm wall-mounted/ suspended base section therefore becomes a tall, floor-standing version of cm 70 (excluding the thickness of the top and the height of the washbasin).

Trieste - Minera-kolorcm 37 d.37 h.13cm 35 d.35 h.11on wall or on countertop on right or leftnoUdine - Minera-kolorcm 42 p.42 h.19,5cm 40,5 p.40,5 h.18on wall or on countertop on right or leftno

Washbasin Model Measurements Internal Basin Mixer Hole Overflow Hole
Bologna - white or black matt ceramic cm 60 d.42 h.17 cm 57 d.39 h.14,5 on the wall
or on countertop on right or left
no
Castillon - glossy white ceramic cm 43 d.43 h.15 cm 41 d.41 h.10 on the wall
or on countertop on right or left
yes
Cognac 42 - glossy white ceramic cm 42 d.42 h.16,5 cm 40 d.40 h.14 on the wall
or on countertop on right or left
no
Den - glossy white ceramic cm 66 d.40 h.14,5 cm 60 d.28 h.11 on washbasin no
Firenze - matt black ceramic cm 43 d.43 h.15 on the wall
or on countertop on right or left
yes
Golfo - glossy white ceramic cm 63 d.48 h.19 cm 60 d.35 h.14/10 on washbasin yes
Hub 50 - matt white corian cm 52,4 d.34,3 h.14,5 cm 50 d.32 h.12 on the wall
or on countertop on right or left
no
Hub 70 - matt white corian cm 72,4 d.34,3 h.14,5 cm 70 d.32 h.12 on the wall
on countertop on right or left
no
Roma - glossy white ceramic cm 43 d.43 h.15 on the wall
on countertop on right or left
yes
Softly - glossy white ceramic cm 60 d.42 h.17 cm 57 d.39 h.14,5 on wall or on countertop on right or left no
Tiffany - glossy white ceramic cm 60 d.43 h.17 cm 57 d.32 h.14,5 on washbasin no

N.B. The mixer tap hole has a standard diameter of 3,5 cm.
It is recommended to use a Waste Drain with continuous flow with basins that do not come with an overflow hole.

The measures of all ceramic washbasins can change (specifically aboout 0,8%) due to mould wear or slight variations of the technical feature of the raw materials that make up the dough.

Optional
internal shaped metal drawer: available for all the models with a deep metal drawer; the drawer is positioned approximately in the middle of the basin cabinet and is shaped to let the pipes through.
organiser: dividing system inside the Legrabox drawer. Available in a Canaletto Walnut or Orion Grey finish.

Maintenance Tips
Melamine: for cleaning, please use neutral liquid detergents. To remove limescale spots use a sponge wet with vinegar or an anti-limescale product, wash and then dry out. Do not use acid products or abrasive powders; do not leave the anti-limescale agents on the surfaces for too long, in order to avoid stains.
Stratified HPL: clean the surface with a soft, damp cloth, without scrubbing so as not to damage or scratch the surface. It is recommended that you only use neutral cleaning products. Do not use substances which are abrasive, scratchy, acidic, salty, intended for metal, or concentrated anti-limescale. Avoid contact with boiling water. Avoid steam cleaners.
Lacquer: clean with soft non-abrasive cloths to avoid scratching the surface. Do not use products containing solvents, acetone or abrasive agents. Avoid silicon, alcohol and wax based products.
Wood: a "living" material with superficial varnish protection; to be cleaned with a soft non-abrasive damp cloth. It is recommended to clean the top in the direction of the veining. Dry with care.
Stone: in order to avoid staining, clean regularly with a damp cloth and neutral cleaning products.
Tekor:in order to maintain Tekor, simply use soapy water or common, slightly abrasive detergents with a cotton cloth or a slightly abrasive sponge, making sure to dry the surfaces carefully. Avoid putting objects on the surface which are very hot or aggressively acidic, and avoid using a mix of solvents. Damage can however be repaired by a specialised craftsman.
Minera-Kolor: to remove most dirt and stains, washing powder combined with an abrasive sponge or a common chlorine or bleach cleaner is sufficient. For the removal of stains caused by limescale, the use of a common limescale remover is recommended. To maintain the original opacity of the item, occasionally clean with amuchina or a 1/20 solution of bleach diluted in water. To enhance the typical satin opalescent finish, occasionally wipe with an abrasive sponge, applying a circular motion.

Further Information...
Gres: grès stoneware is the result of a water and clay mixture that, through the extrusion process, changes into a plate with extraordinary mechanic properties. The vitrification closes the orifices and guarantees the highest resistance to water and stains.
Tekor: a mineral compound covered with a layer of resin which gives it both physical and chemical resistance.
QTOP: it's a quartz-resin product consisting of natural materials (quartz and granite) and a high-quality binding agent, supplemented with coloured pigments and glass or mirror granules.
Minera-Kolor: is composed of natural mineral fillers (calcium carbonates and aluminium trihydrates) bound by a low percentage of polyester resin: a material that is therefore elegant to the touch, hygienic and suitable for bathroom furnishings. The technical enamel covering the surface of the material is matt coloured, with excellent physical and chemical resistance. It is resistant to boiling water and changes in temperature. Any colour variations that have arisen through use can be easily removed by simple cleaning, using a lightly abrasive sponge in a circular motion.

Video

Additional Information

Area of Production
Italy
Assembling
Medium Assembling
Assembling Instructions
Vedi Tab Video
Other Products from the same Collection
View all the products of the collection (cod.cmp)

Partner Factory

This bathroom furniture is a 100% Italian product made by a company from the province of Pordenone that started in the field during the 90s. Initially oriented towards the production of classic and modern bathrooms, it grew throughout the years earning national and international fame in the water and sanitary system as well. The company headquarters cover 16.500 square metres and are equipped with innovative machinery. Its business is characterised by the high quality standard of the materials employed, studied and renovated every year to follow the latest fashion. The solid wood comes from forests that follow regularised policies regarding tree cutting and all the other materials are either recycled or recyclable. Every productive phase takes place inside the company itself in order to guarantee the highest monitoring level.

The company creates its personal models but still focuses on the needs of modern housings in terms of space and taste. Moreover, the modular nature of the products allows for high customisable projects. It is possible to widen the initial composition with additional accessories and equipment in every moment. The wide collection and the colour range offered cover several different styles and types of environment: from a more elegant and refined bathroom to an original design, from soft and natural shades to pastel colours. Cabinets with drawers and baskets placed under the basin, wall-hung drawers, columns to store linen or beauty products, dressing tables of the most diverse shapes: the bathroom vanities of this collection are thought to satisfy every need.

Bathroom Furniture

You may also like