Patchwork Terminal Lounge
Wardrobe with Bookcase

Open side column for Lounge Patchwork wardrobes, lacquered or oak, to be used as an end bookcase in hinged wardrobe compositions.

* Required Fields


From €2,414.95

Description

Lounge Patchwork is an open side column for wardrobes, which can be used as an end bookcase at the end of a Lounge composition or wall unit. Available in two depths to complete both bedroom and living room wardrobes, it can be entirely matt lacquered or finished in stained oak, with the possibility of two-tone elements.
Equipped with thin wooden shelves only 0.8 cm thick, Lounge Patchwork makes it possible to embellish and make functional the sides of wardrobes that go against a wall but remain visible, especially in partition or walk-in wardrobe situations. The width of only 39.1 cm, to be added to the overall width of one's own composition, means that anelegant bookcase can be obtained from an unused space without distorting the proportions and volumes of the original composition.

Quality and Value
end bookcase for Lounge wardrobes, to be positioned at the beginning or end of a composition
available in two depths, which can be coordinated with both the wardrobes in the sleeping area and with the equipped floors
wide choice of matt lacquers and oak shades, with the possibility of two-tone combinations
customised height to suit any type of wardrobe
possibility of LED lighting on both sides, to illuminate the storage units via controlled socket

Dimensions
Width: cm 39.1
Depth: cm 38 / 59.2
Height: made to measure between cm 186 and 295

Materials and Finishes
- matt lacquered
- open-pore oak wood

Purchase Information
Matt or glossy lacquer (where available) is available for this product in RAL, NCS and Sikkens scale colours. Please contact our Customer Service for a quotation or more information.

Technical study

Technical Specifications and Equipment
Structure: bottom and top made of TAMMEL (honeycomb core + melamine), respectively 3.2 cm and 2.5 cm thick. The honeycomb core is made of carefully selected solid fir wood and the honeycomb is clad with MDF panels. It guarantees long-lasting non-deformability, lightness, practicality and meets all the requirements of European Class 1 standards in terms of limiting harmful formaldehyde emissions, and complies with CARB2 standards. Side panels in plywood.
Backrest: made of wood particle board (Class E1 with low formaldehyde emissions, meets CARB2 standards. 0.8 cm thick.
Shelves and side partitions: 0.8 cm thick particle board panel, matt lacquered or veneered.

Optional
Vertical LED bars: positioned at the rear on the two closing sides, facing inwards. They can be fitted with a 75W transformer and switched on via a controlled socket. Warm LED 3000K-24V, consumption 11 W/m

Mounting tips
Pre-assembled hardware on all elements to facilitate and speed up assembly. The feet, which are also pre-mounted on the plinths, allow for correct levelling of the cabinet thanks to a maximum extension of 0.8 cm. In the unloaded position they measure 0.5 cm.

The following are required for mounting the body:
- in width cm 4 (if installed in recess cm 2)
- in height 3 cm

Read more...
Tamburato: is a panel made with an internal honeycomb structure and a 5 / 7 cm perimeter frame in first choice solid fir closed with 2 MDF panels 0.3 / 0.4 cm thick, subsequently lacquered or veneered.
The strengths of honeycomb sandwich panels are
- greater durability
- greater load resistance;
- significantly reduced panel weight (up to 60% less), which is useful for transport, assembly, moving or relocation, but above all for reducing the weight of the sashes on structures and hardware;
- ironmongery always fixed to the perimeter (solid fir wood) of sides and doors, so hinges will have greater strength and furniture will last considerably longer
- better resistance to humidity, as the material 'breathes';
- exclusively '100% Made in Italy' product.

Additional Information

Area of Production
Italy
Assembling
Medium Assembling
Other Products from the same Collection
View all the products of the collection (cod.olv)

Partner Factory

This piece is made by a prestigious Italian company which has operated within the furniture industry since 1929. The company began as a carpentry workshop, before transforming into a furniture factory in 1949. Over the years, thanks to collaborations with well-known architects and designers, it has acquired fame at both a national and international level. The headquarters are located in Emilia Romagna, but the company is now recognised and valued in over 50 countries around the world.
True to their roots, the company catalogue centres around high-quality, modern furniture and accessories which are mostly made from wood. In particular, there are several pieces of furniture featuring skilfully-crafted wooden facades and doors with pleated details, consisting of vertical slats arranged in a regular pattern. The catalogue reflects modern trends and ways of living, offering customisable and durable options for every room of the house. Furniture solutions for the living room include wall units, tables, sideboards and cupboards. The bedroom furniture range features numerous models of wardrobes, beds and storage units.
As well as furnishing private homes and villas, this prestigious ‘Made in Italy’ company is committed to the design and manufacturing of quality contract furniture, particularly for hotels, showrooms, housing complexes and renowned offices around the world.

High quality Italian furniture for the living and bedroom area

You may also like