Material Specifications
Structure: cm 1,8 thick panels made of V100, E1 Class waterproof particle wood.
Fronts: doors, drawers and basket made of V100, E1 Class waterproof particle wood panels. The front finish in the smooth lacquered version is made of MDF with a thickness of cm 1,9.
Technical Specifications and Equipment
Structure: with open back to connect the pipes.
Legrabox Drawers / Baskets: characterised by straight sides both internally and externally, 1.28cm thick. Equipped with full extension metal runners and soft closing system.
Handles: there are several handle models to choose from, as well as a push-pull opening option. The cod. 152, cod.16 and groove handles are all available in a matt lacquer finish in all the colours displayed in the samples page.
Recess grip handles only available with melamine and matt lacquer finishes. Groove handles only available with wooden (except for 306 Smoky Walnut) and lacquer finishes.
The mod.68 handles protrude by 4cm from the surface of the door.
Basin Model |
Measurements |
Basin Internal Measurements |
Mixer Tap Hole |
Overflow Hole |
Bliz - glossy white mineralguss |
cm 120,5 d.51,5 h.17,5 |
cm 54 d.30,5 h.12,5 |
central |
yes |
Please Note: the mixer tap hole has a standard 3,5 cm diameter.
Maintenance Tips
Melamine: simply use neutral liquid detergent to clean. To get rid of limestone stains clean the side with anti-limestone or a vinegar soaked sponge, then rinse and dry. Do not use acid, abrasive powder or products; do not leave anti-limestone products in contact with the side for long as they may leave rings.
Lacquer: to clean use a soft and not abrasive rag to avoid damaging the surface. Do not use products with solvent, acetone and abrasive, or wax, alcohol and silicone-based products.
Wood: "living" material with protective painted cover; use a soft, not abrasive and slightly dump rag to clean. It is recommended to clean the side following the wood grain and then dry with care.
For More Information...
Mineralguss: material composed of calcium carbonate and aluminium trihydrate, bonded by a low percentage of polyester resin. The gelcoat film that covers the surface guarantees an excellent physical and chemical resistance. This compound is a ductile material, resistant to heat. Possible colour variations, caused by high temperatures, can be removed by cleaning with a slightly abrasive sponge, and polishing afterwards.
Clean with a sponge and a standard cream detergent. The top surface must not get in contact with solvents and alkaline lotions such as ammonia. Hair dyes mustn't be left in the sink for too long, but rinsed immediately. Never fill the basin with water hotter than 60°C.
Optional
Organiser: dividing system inside the Legrabox drawer. Available in a Canaletto Walnut or Orion Grey finish.