Technical Specifications
Perimetral Structure: thickness cm 1,5. The upper top is joined to the side vertical elements with a junction at 45° with a mm 2x2 gap. The lower top is, instead, joined to the side vertical elements to make it easier the position close to the other elements.
Fronts: thickness cm 2. As the compartments, the fronts are recessed of cm 1,5 compared to the perimetral structure.
Feet:
- methacrylate / shaped th. mm 15
- cylindrical th. ø mm 20
Opening system: fronts opening through push-pull. For the drawers, this is positioned high in the center, while for the hinged doors it is positioned high in the corner. The opening of the folding doors is from top to bottom.
Vein Directions: for the perimetral structure and wooden compartments, the direction of the vein follows the direction of the frame. For the fronts, instead, the vein is horizontal.
Internal Drawers Finish: jute textured
Internal Shelves: glass thickness mm 8
Handle:
- Minimal: cm 6
- Segno: cm 8 h.0,5 - d.1,4
- Assisa: cm 24 h.1,1 - d.2,1 (drilling space cm 12,8)
- Star: (width based on the front) cm h.1,1 - d.2,1
Chart matching front finishes with Minimal / Segno handle finish
| Front Finish |
Handle Minimal / Segno
|
| Coal Oak |
Brown |
| Clay Oak |
Matte Terranova |
| Avana Oak |
Brown |
| Grey Oak |
Brown |
| Cuba Oak |
Brown |
| Natural Knotty Oak |
Brown |
| Caramel Knotty Oak |
Brown |
| Heat-treated Oak |
Brown |
|
| Canaletto walnut |
Brown |
|
| Matte / Glossy lacquer |
Matte / Glossy lacquer |
|
| Metallic Lacquer |
Metallic Lacquer |
|
| Ecowalnut textured |
Brown |
|
| Lotus Nature textured |
Matte Rope Grey |
|
| Lotus Dove Grey |
Matte Rope Grey |
|
| Lotus Terra |
Matte Terranova |
|
| Sketch Sand textured |
Canvas |
|
| Sketch Rock textured |
Silice |
|
| Sketch Tobacco |
Beaver |
Optional
Lighting: external under-base with LED bars of 4000K including power supply and remote.
For more Information...
Laminate: this is a wood effect coating usually applied to various materials, such as melamine panels. This coating consists of sheets obtained by pressing together several layers of paper sheets soaked in melamine or phenolic resins. There are different types and aesthetically it can present different aspects, such as a wooden appearance.
Cleaning and Maintenance
The surfaces must not be placed in contact with water, liquids in general, excessive heat and humidity.
Cleaning should only be carried out with a soft cloth; the use of alkaline products, solvents and abrasives is not recommended. The products are not suitable for outdoor use.
