Model and Specific Measurements
Keramik top thickness for fixed models: cm 1,8 (clear glass 1,2 cm thick coupled with laminate porcelain stoneware cm 0,6). THickness cm 1,7 for the top in Keramik stone KM07 Matt Portoro Marble and KM08 Glossy Portoro Marble (clear glass thickness cm 1,2 coupled with laminate porcelain stoneware cm 0,5). Thickness cm 5 for top 200 x 120 cm and 240 x 120 cm with lower rounded profile. Thickness cm 6 for top 300 x 128 cm with lower rounded profile. For indoor use only.
Keramik top thickness for extending models: cm 1,6 (clear glass 1 cm thick couple with laminate porcelain stoneware 0,6 cm). Thickness cm 1,5 for top in Keramik stone KM07 Matt Portoro Marble and KM08 Glossy Portoro Marble (clear glass 1 cm thick couple with laminate porcelain stoneware 0,5 cm thick). For indoor use only
For more information...
Bevelling: it is a processing performed on mirrors, glasses and crystals in order to finish them and smooth the edges; through this process, it is possible to create a perimeter band with a width varying from 10 to 40 mm and with an angle inferior to the standard 90 ° one (usually around of 7°). It is a very delicate and valuable process applied to precious mirrors and tops.
Heritage Oak: Oak is a great example of a recovered material and "no deforestation" policy. The beams used for this wood come from Oakwood structures belonging to old houses, stables, labs and factories which have been completely demolished, the biggest part comes from Central or Eastern Europe.
Heritage Oak products are crafted through the veneer technique, obtained by cutting selected beams after the removal of nails and other iron-based elements.
Each lot of beams is different from the other because each one of it has a different story and a different state of preservation. The previous "life" of these beams makes the "black patina" a feature of the wood cracks; moreover, the places where the nails used to be also present oxide.
Masterwood: exclusive processing by Cattelan Italia, which consists in the making of splint tops - different among each other depending on measurements and grins - diagonally positioned. The result is a chromed texture always new in a way that every table could be considered a unique item.
Keramik Stone: the tops made of Keramik stone are manufactured with a special ceramic with a stone effect that shows shades similar to Calacatta stones (a marble characterised by soft grey, yellow- gold, or brown-pink veining); Alabaster (a rock similar to marble with shades that range from yellow to grey up to amber red) or Slate ( a grey-black rock). The lower part of the top is made of bevelled clear glass that appears black after a process of glueing.
To clean the top, we suggest using delicate liquid detergents that need to be removed with a wet sponge. If spots and rings may occur, we suggest rubbing the top with a water and baking soda solution, let such a solution have an effect for a few minutes and then wipe it with a wet sponge. Being a porous natural material, it is important to wipe dirt off in order to avoid that some substances penetrate the top.
CrystalArt: it is a tempered and bevelled clear glass, decorated with a printed pattern on the back of the glass, this decoration is applied during the tempering phases of the manufacturing process. The pattern is always the same but the effect changes according to the size of the top.
