Keramik Ceramic Stone Layer Thicknesses:
Fixed Models: cm 1,8 ( clear glass layer cm 1,2 + porcelain stoneware layer cm 0,6)
Extending Models: cm 1,4 (clear glass layer cm 0,8 + porcelain stoneware layer cm 0,6)
For more information...
Extra clear glass: Clear glass shows a light blue-green colour like most glass, while the extra-clear glass is treated so that such a blue-green effect is considerably dimmed and can't really influence or change the colour of the objects that can be seen by looking through the tabletop, like for example a carpet, some chairs and the very structure of the table.
Keramik Stone: The tops made of Keramik stone are manufactured with a special ceramic with a stone effect that shows shades similar to Calacatta stones (a marble characterised by soft grey, yellow- gold, or brown-pink veining); Alabaster (a rock similar to marble with shades that range from yellow to grey up to amber red) or Slate ( a grey-black rock). The lower part of the top is made of bevelled clear glass that appears black after a process of glueing. To clean the top, we suggest using delicate liquid detergents that need to be removed with a wet sponge. If spots and rings may occur, we suggest rubbing the top with a water and baking soda solution, let such a solution have an effect for a few minutes and then wipe it with a wet sponge. Being a porous natural material, it is important to wipe dirt off in order to avoid that some substances penetrate the top.
CrystalArt: it's a tempered and bevelled clear glass, decorated with a printed pattern on the back of the glass, this decoration is applied during the tempering phases of the manufacturing process. The pattern is always the same but the effect changes according to the size of the top.
Bevelling: it is a processing performed on mirrors, glasses and crystals in order to finish them and smooth the edges; through this process, it is possible to create a perimeter band with a width varying from 10 to 40 mm and with an angle inferior to the standard 90 ° one(usually around of 7°). It is a very delicate and valuable process applied to precious mirrors and tops.
