Lounge is a wooden sliding door and rail for the outside of a wall, available in oak wood veneers or matte, glossy and metallic lacquers in a vast range of colours. The door is completely custom-made in both width and height, and is available in single-door configurations or instead with double coplanar doors to close spaces from 73 cm up to 190 cm. Therefore, the doors can adapt to separate different home spaces, like the master bedroom from the bathroon or walk-in closet, or the kitchen from the living room. Alternatively, the doors can be used to divide a home office from the living zone.
The sliding door is designed to perfectly match with all the Lounge furniture, both from the living zone and bedroom collections: the available materials, finishes and colours are the same. Additionally, the outer side of the door can be decorated with metal inserts, geometric engravings or applied slats, guaranteeing continuity with wardrobes and wall panels.
The sliding door track, applied externally on the wall, is available with a custom width: this can in fact be more than the necessary minimum, covering the entire length of the wall up to a maximum of 4 metres, for an optimal aesthetic result. The door is opened via a groove handle featured on both sides.
Quality and Value
can be custom-made both in width and height to be perfectly incorporated in different spaces
single sliding door or double coplanar door with personalised materials, finishes and colours
outer side of the door can be decorated with metal inserts or applied solid wood slats
opened by means of a groove on both sides, optional track-covering case in matte lacquered metal
a refined solution for separating two spaces in the bedroom zone, or the kitchen from the living room
high quality single components, enriched by Made in Italy production and design
Measurements
A) Doorway
- Width: from cm 73 to cm 190
- Height: from cm 210 to cm 290
B) Sliding Door
- Width (Single Door): equal to doorway width + 7 cm
- Width (Double Door): equal to doorway width + 10 cm
- Height: equal to doorway height + 5 cm
Materials and Finishes
Door/ s:
- matte / glossy / metallic lacquer
- open pore / aged oak wood
Door Sliding Track:
- anodised aluminium, painted brown
Track-Covering Case:
- matte lacquered anodised aluminium
Info for your Purchase
If the doorway is irregular by more than 0,5 cm, contact our Customer Service.
Indicate in the Configurator the exact dimensions of the doorway in which the Lounge sliding door will be installed to proceed with production, taking the measurements as follows:
- Doorway Width: measure it three times, once close to the floor, then at half the height and finally close to the ceiling. Report the three widths obtained, in this order, in the dedicated section within the Configurator.
- Doorway Height: measure it three times, from the floor to the intrados of the doorway or to the ceiling, once on the left, then in the centre and finally on the right. Report the three widths obtained, in this order, in the dedicated section within the Configurator.
Matte or glossy lacquer (where available) in RAL, NCS and Sikkens colours are available for this product. Please contact our Customer Service for a quote or additional info.