The alterations available on this product page allow for the reduction in width, height and depth of the sliding and coplanar wardrobes from the Pacific collection. Specifically:
- the reduction in width involves the cutting of the top panel, back panel, door, shelves, bottom panel and clothes rails. The alteration can be applied to the left or right side.
- the reduction in height involves the cutting of the back panel, partitions, doors and side panels.
- the reduction in depth involves the cutting of the top panel, bottom panel, partitions, side panels and shelves.
Information for your Purchase - Reduction in Width
The reduced module must have a minimum width of 72,5 cm; Pull-out accessories cannot be added to the reduced module or the module next to it if the overlapping of the doors does not allow for them to open...
The Arkansas, Jersey, Louisiana, Vermont, Virginia and Pacific Coplanar sliding wardrobes cannot be reduced in width.
N.B. When indicating the desired width, please note that 3,5 cm are required to release the side-panel mounting pins.
For example: if the available wall is 290 cm wide, the maximum width of the wardrobe should be 286,5 cm.
Information for your Purchase - Reduction in Height
It is not possible to reduce the height of the Arkansas, Louisiana, Jersey, Vermont, Virginia and Alabama sliding wardrobes with glass door/s.
It is not possible to reduce the height of the Pacific Coplanar wardrobe with doors from the Arkansas, Louisiana and Vermont collections.
N.B. When indicating the desired height, please note that 6 cm of space is needed for mounting the structure of the sliding wardrobe.
For example: if the available wall is 260 cm high, the maximum height of the sliding wardrobe should be 254 cm.
N.B. When indicating the desired height, please note that 7 cm of space is needed for mounting the structure of the coplanar wardrobe.
For example: if the available wall is 260 cm high, the maximum height of the coplanar wardrobe should be 253 cm.
Information for your Purchase - Reduction in Depth
In the reduced modules, it is not possible to reduce the internal accessories (with the exception of shelves).
N.B. The modules with a d.43,5 cm sliding wardrobe structure can be reduced in depth by a maximum of 16 cm, while the modules with a d.59,5 cm sliding wardrobe structure can be reduced in depth by a maximum of 32 cm.
N.B. The modules with a d.43,5 cm coplanar wardrobe structure can be reduced in depth by a maximum of 6 cm, while the modules with a d.59,5 cm coplanar wardrobe structure can be reduced in depth by a maximum of 22 cm.
