The modifications available on this product page allow for the reduction in width, height and depth of the hinged and folding wardrobes (Driver) from the Wide collection. Specifically:
- the reduction in width involves the cutting of the top panel, back panel, door, shelf, bottom panel and clothes rails. The modification can be applied to the left or right side; for hinged wardrobes with a 75,2 / 85,2 / 95,2 or 110,6 cm module, the reduction can be applied to both sides.
- the reduction in height involves the cutting of the back panel, partitions, doors and side panels.
- the reduction in depth involves the cutting of the top panel, bottom panel, partitions, side panels and shelves.
Information for your Purchase - Reduction in Width
Drawer units and pull-out accessories cannot be added to modules which have been reduced in width.
Driver Wide cabinets from 148.3 to 227.8 cm cannot be reduced in width. On the other hand, wardrobes from 245.7 to 340.6 cm can be reduced in width, but only by intervening on one or both of the hinged columns on the side of the central modules with folding doors and Pivot hinge. When in presence of hinged modules reduced in width, it is necessary to keep a distance from the wall necessary to gurantee the correct opening of the folding door (wide cm 48,4 or 56,1 according to the chosen configuration).
N.B. When indicating the desired width, please note that 4 cm are required to release the side-panel mounting pins.
For example: if the available wall is 290 cm wide, the maximum width of the wardrobe should be 286 cm.
Information for your Purchase - Reduction in Height
The reduced modules necessarily needs to have a minimun height of cm 194,3 (the custom height of Driver folding wardrobes does not have to be lower than 189,5 cm).
N.B. When indicating the desired height, please note that 2,5 cm are needed for mounting the hinged wardrobe structure (which becomes 3,5 cm if there is a LED bar power supply on the top panel).
For example: if the available wall is 240 cm high, the maximum height of the hinged wardrobe should be 237.5 cm (which becomes 236,5 cm if there is an LED bar power supply on the top panel or 234,5 cm in folding wardrobes Driver Wide).
Information for your Purchase - Reduction in Depth
It is not possible to add drawers and pull-out accessories inside the reduced modules.
Driver Wide wardrobes can only be reduced in width by choosing a depth between 43.8 and 61.2 cm.
N.B: the corner element with a wardrobe structure d. 41,6 cm must have a minimum width of 73 x 73 cm, while a corner element with a structure d. 59 cm must have a minimum width of 88,5 x 91 cm.
