JavaScript seems to be disabled in your browser.
You must have JavaScript enabled in your browser to utilize the functionality of this website.

Rover Lounge Low sliding wardrobe with long handles, the low height version that can be made to the centimetre between 186 and 226 cm

Sliding closet Rover Lounge Low with long handles, matte lacquered or metallic

Rover Lounge sliding closet, which can also be made in a version with clear, smoked and mirrored glass doors

Rover Lounge sliding closet in smoked glass. It is also possible to compose versions with central glass doors and lacquered or wood side doors

In the case of glass, stone or fabric compositions, the handle is integrated with the metal frame and matching the latter

Rover Lounge sliding glass composition mounted in an alcove, a refined solution that can be made to measure in height to the centimeter

Sliding closet Rover Lounge Low, with milled work on the lacquered door. Various designs are available in the Configurator

Example of Rover Lounge sliding closet with lacquered side doors and oak center door

The contrast between lacquered door and milled oak door is one of the customizations that makes the Rover Lounge sliding closet unique and recognizable

Wooden center door with 10:2 milling, one of several variations available on Rover Lounge sliding closet doors

The interior structure of the Rover Lounge sliding closet can be lacquered to match the doors, melamine or oak veneer

Example of a two-door composition of Rover Lounge sliding closet. A total of more than 15 variants with 2, 3 or 4 doors are available

Rover Lounge sliding closet with leatherette-covered doors and lacquered metal handle integrated into the door frame

The Rover Lounge sliding closet can be upholstered in a wide and select sampler of fabrics and faux leathers

Example of the interior organization of a Rover Lounge sliding module. The interior equipment, which is fully customizable in finish and placement, can be found among the alternative products

Double sliding door composition of the Rover Lounge closet, upholstered in fabric

Detail of metal handle, found on models with glass door, Laminam stone or covered in fabric and leatherette

Important living area furnished with elements from the Royal day collection and Rover Lounge closet upholstered in fabric

- Decoration "10:2" with vertical "V" shaped incisions mm 2 th.2

- Decoration "10:2" with vertical "V" shaped incisions mm 2 th.2 (available only on oak wood veneer)

- Decoration "10:10" with vertical "U" shaped incisions mm 10 th.2 (available only on lacquered wood)

- Decoration "80:40" with "U" shaped incisions mm 10 th.2 at irregular intervals (available only on lacquered wood)

- Decoration with "Metal insert" mm 10 th. 2 ("version 1" with n.2 horizontal + n.1 vertical inserts or "version 2" with n.1 horizontal + n.1 vertical inserts)

- Decoration "Line" with vertical "V" shaped incisions mm 2 th.2

- Decoration "Shanghai" with diagonal "V" shaped incisions mm 2 th.2

Example of a TAMMAS (honeycomb + solid wood) door with Wave processing. Only available when purchased with a project, please contact our Customer Service and consult the Technical Information section for more details.

Rover Lounge sliding closet available sizes and modularity

Diagram of sidewall drilling on Rover Lounge cabinet structures for free positioning of included shelf and any optional equipment

+ 25

MORE IMAGES

Rover Lounge Low
Lacquered Sliding Wardrobe

Rover Lounge Low customised sliding wardrobe with long handles in heights between 186 and 226 cm. With 2, 3 or 4 doors, also in wood or covered in fabric and faux leather.

* Required Fields

Wardrobe Width *

Please Note *

pull-out drawers and accessories can only be positioned on the central module

Please Note *

pull-out drawers and accessories can only be positioned on the side modules

Please Note *

pull-out drawers and accessories can only be positioned on the central module

Wardrobe Depth *

Internal Accessories *

n.1 shelf + n.1 clothing rod per module

Internal Accessories *

n.1 shelf per module

Wardrobe Height *

from 186 to 225,9 cm

Customised Wardrobe Height * Specify the required height by inserting a measurement between 186 and 225,9 cm. PLEASE NOTE: An additional 4 cm is necessary for the assembly.

Door Finish *

Door Finish *

Door Finish *

Door Finish *

Door Colour Code View Samples and Insert Code

Door Colour *

Glass Door Type *

Glass Door Colour Code View Samples and Insert Code

Door Frame Finish * The glass, Laminam and upholstered doors are equipped with an integrated handle to match the frame.

Brown Lacquer Metal
Metallic Lacquer Metal +€379.80

Door Frame Colour Code View Samples and Insert Code

Door Upholstery Type *

Metal Insert Finish *

Matte Lacquer
Metallic Lacquer

Metal Insert Colour Code View Samples and Insert Code

Side Doors Finish *

Side Doors Finish *

Side Doors Finish *

Side Doors Finish *

Side Doors Colour Code View Samples and Insert Code

Side Doors Colour *

Side Glass Door Type *

Side Glass Door Colour Code View Samples and Insert Code

Side Door Frame Finish * The glass, Laminam and upholstered doors are equipped with an integrated handle to match the frame.

Brown Lacquer Metal
Metallic Lacquer Metal +€379.80

Side Doors Frame Colour Code View Samples and Insert Code

Side Door Upholstery Type *

Metal Insert Finish *

Matte Lacquer
Metallic Lacquer

Metal Insert Colour Code View Samples and Insert Code

Central Doors Finish *

Central Doors Finish *

Central Doors Finish *

Central Doors Finish *

Central Doors Finish *

Central Doors Finish *

Central Doors Finish *

Central Doors Finish *

Central Doors Colour Code View Samples and Insert Code

Central Doors Colour *

Central Glass Door Type *

Central Glass Doors Type *

Central Glass Doors Colour Code View Samples and Insert Code

Central Doors Frame Finish * The glass, Laminam and upholstered doors are equipped with an integrated handle to match the frame.

Brown Lacquer Metal
Metallic Lacquer Metal +€189.90

Central Door Frame Colour Code View Samples and Insert Code

Central Door Frame Finish * The glass, Laminam and upholstered doors are equipped with an integrated handle to match the frame.

Brown Lacquer Metal
Metallic Lacquer Metal +€379.80

Central Door Frame Colour Code View Samples and Insert Code

Central Door Upholstery Type *

Central Doors Upholstery Type *

Metal Insert Finish *

Matte Lacquer
Metallic Lacquer

Metal Insert Colour Code View Samples and Insert Code

Opening Type *

Handle Finish *

Matte Lacquer

Handle Colour Code View Samples and Insert Code

Clothing Rod Finish *

Clothing Rod Colour Code View Samples and Insert Code

Structure Colour *

Structure Colour Code View Samples and Insert Code

Closing Sides Finish *

Closing Sides Type *

Sides Upholstery Type *

Closing Sides Frame Finish *

Brown Alluminium
Metallic Lacquer

Closing Side Frame Colour Code View Samples and Insert Code

Closing Side Colour Code View Samples and Insert Code

Purchase Information *

Interior Side Finish matching the Structure

Purchase Information *

Interior Side Finish matching the Exterior Side

Central Divider Type *

Central Divider Finish *

Brown Aluminium
Metallic Lacquer +€194.12

Central Divider Colour * View Samples and Insert Code

Internal Divider Type *

n.2 Panels matching the Structure
----------STRUTTURA MELAMINICO
n.2 Metal Frames +€860.88
---------- STRUTTURA LACC/ROVERE
n.2 Metal Frames +€557.04

Internal Divider Type *

n.3 Panels matching the Structure
----------STRUTTURA MELAMINICO
n.3 Metal Frames +€1,291.32
n.1 Metal Central Divider, n.2 Side Dividers matching the Structure +€430.44
----------STRUTTURA LACC./ROVERE
n.3 Metal Frames +€835.56
n.1 Metal Central Divider, n.2 Side Dividers matching the Structure +€278.52

Internal Divider Finish *

Internal Divider Colour Code View Samples and Insert Code

Central Door Opening Direction *

towards the Right with Handle on the Right
towards the Left with Handle on the Left

External Door Placement * By External Door we mean the door that protrudes the most from the Frame.

external door on the Left
external door on the Right

Optional

------SINGOLO FIANCO TELAIO
vertical LED bar integrated in the frame divider +€485.30
------n.2 FIANCHI TELAIO
n.2 vertical LED bars integrated in the frame dividers +€865.10
------n.3 FIANCHI TELAIO
n.3 vertical LED bars integrated in the frame dividers +€1,477.00

Transformer for LED bar * When using internal accessories with LEDs, choose the option with the highest wattage. To find out about the power consumption of LED bars, see the section Technical Specifications and Equipment.

------SINGOLO FIANCO TELAIO
n.1 transformer: max power 75W
n.1 transformer: max power 150W +€63.30
------DUE FIANCHI TELAIO
n.1 transformer: max power 150W
n.2 transformers: max power 150W each +€168.80

Transformer for LED bar *

------TRE FIANCHI TELAIO
n.2 transformers: max power 150W each

Quantity

From €2,672.32

View Samples

Wishlist

Description

Rover Lounge Low is a sliding wardrobe with long handles, which can be customised between 186 and 225 cm. Available in more than 15 compositions also in the reduced depth version, Rover Lounge combines lacquered, wooden or glass doors, also smoked and frosted finished, in a single product. There are also more original and impactful solutions such as sliding doors in Laminam or covered in fabric or faux leather.

The ample customisation of the exterior, also extended to the modern lacquered metal handles, also continues inside the Rover wardrobe: the page featuring internal accessories allows the addition of extra shelves, drawer units, cubby storage, hanging rods and pull-out accessories.

The Rover Lounge Low product of the same name, which can be found among the alternative products at the bottom of the board, allows you to enjoy the same creative opportunities at higher heights, up to 260 cm.

The Lounge sliding wardrobes derive from the day collection of the same name and go perfectly with it: either to link living and sleeping areas under a strong aesthetic unity, or to create unique compositions by combining hinged modules, boiseries and open compartments equipped with shelves, big shelves and dressing table.

Quality and Value
sliding wardrobe customisable in height between 186 and 225 cm
lacquered or wood, glass, stone or fabric covered doors than can be freely combined
numerous 2, 3 and 4 door compositions to meet all space requirements
can be combined, in terms of construction type and finishes, with other wardrobes from the Lounge collection, also in corner solutions
can be equipped with shelves, drawer units and pull-out accessories on the dedicated page

Measurements
Width:
- see Configurator or diagram at the end of the Gallery
Depth:
- column: cm 45,5 / 66,6
- structure: cm 38 / 59,2
- sliding door: cm th.4
Height:
- customised from 186 cm to 225 cm

Materias and Finishes
Structure:
- melamine
- matte lacquer
- open pore oak wood
Doors:
- matte / glossy lacquer
- open pore oak / aged oak wood
- clear / lacquer / mirror glass
- matte Laminam stone
- fabric
- faux leather
Frame Doors and Handles (only on glass, Laminam or upholstered doors):
- matte / metallic lacquer metal

Purchase Information
Each 38 cm deep module includes an internal shelf as standard; each 59,2 cm deep module includes an internal shelf and 2 clothing rods.
You can purchase other internal accessories in the product card Lounge Hinged Internal Accessories, in the alternative products at the bottom of the page and add the desired items to the basket.
For configurations with side doors in glass / Laminam / fabric and central door(s) in wood or lacquer, the latter will have an aluminium pendulum handle as standard, recessed into the door thickness and not visible from the front.
Laminam doors are only available on 69,5 and 93,5 cm modules
In the widths 266,5 / 302,5 / 338,5 / 410,5 / 458,5 cm some modules cannot be fully opened and therefore cannot be equipped with drawers and pull-out accessories. The modules affected by this compositional limitation are highlighted in the diagram at the end of the gallery and indicated in the Configurator.

Matte or glossy lacquer (where possible) is available for this product in RAL, NCS and Sikkens colours. Please contact our Customer Service for a quotation or more information.

Technical study

Technical Specifications and Equipment
Structure: made of TAMMEL (honeycomb coreboard + melamine). The honeycomb core is a frame made of carefully selected solid spruce and the honeycomb is clad with MDF panels. It guarantees long-lasting non-deformability, lightness, practicality and meets all the requirements of European Class 1 standards regarding the limitation of harmful formaldehyde emissions, it complies with CARB2 standards.
Sides: with a depth of 38 cm, the side panels are made of wood particle board (class E1 with low formaldehyde emission). With a depth of 59,2 cm, the side panels are made of honeycomb sandwich panels with a solid fir frame. The panels in both depths are 2.5 cm thick and comply with CARB2 standards.
Backs: in wood particle board panels (class E1 low formaldehyde emission), 0,8 cm thick.
Base and Top: in honeycomb sandwich panels, respectively 3,2 cm and 2,5 cm thick.
Shelf: supplied in 3,2 cm thick honeycomb coreboard.
Clothing Rod: included in modules with a depth of 59.2 cm. With rectangular section 3x1 cm in brown or lacquered finish.
Door height from ground: cm h.1,1.
Sliding doors: in 2,8 cm thick honeycomb sandwhich panels with solid fir, lacquered or wooden frames. The glass, Laminam or upholstered doors are fitted with a brown metal or lacquered metal frame, with integrated, matching handle. The fronts can be plain or customised (only in lacquered or wood finish):
- Shanghai (only in matte lacquered finish) diagonal "V" engravings 0,2 cm thick.
- Line (only in matte lacquered finish): vertical "V" engravings 0,2 cm thick.
- with metal insert: cm 1 th.0,2 in "version 1" with n.2 horizontal + n.1 vertical or in "version 2" with n.1 horizontal + n.1 vertical.
- 10:10 (only in matte lacquer finish): incisioni a "U" cm 1 sp.0,2.
- 80:40 (solo in finitura laccato opaco): "U" shaped engravings cm 1 th.0,2 with variable pitch.
- 10:2: vertical "V" engravings cm 0,2 th.0,2.

Doors also available in TAMMAS (honeycomb + solid wood), honeycomb with solid fir frame and solid wood honeycomb plated on both sides, dyed in the sample finishes and decorated with 10:10 or Wave processing. Only available by project, for further information, please contact our Customer Service. Door sliding track: in brown metal finish with slow closing mechanism with magnet.
Door track: in brown metal finish, with slow-motion closing mechanism with magnet.
Handles:
- Pendulum: in grey aluminium, recessed in the thickness of the door and therefore not visible from the front.
- Oblique: 3,8 d.2,6 h.100 cm. Matte lacquered or lacquered metal finish.
Useful height: To obtain the useful internal height of the wardrobe, simply remove the thickness of the unloading adjusting feet (0,5 cm), the base (3,2 cm) and the top (2,5 cm) from the overall height of the composition. Some examples:
- for wardrobe cm h.226: cm 208,1
- for wardrobe cm h.260: cm 242,1

Please Note: The sides are always supplied without edging on the short sides. This difference in finish, which is often hidden from view once the wardrobe is assembled, deliberately leaves the solid spruce frame of the honecomb sandwich panel exposed in order to enhance the wooden component of the element and show the high quality of the finished product.

Drilling Sides
Depth 38 cm: pair of Ø 1,5 mm holes, spaced 9,6 cm apart, placed every 35,2 cm (see diagram in gallery).
Depth 59,2 cm: Ø 1,5 mm holes every 9,6 cm for the entire sidewall height.

Optional
Vertical LED bar: positioned on the internal metal division of the module. Can be fitted with a transformer (maximum power supported 75/150W) and switched on via sensor. Warm LEDs 3000K-24V, consumption 11 W / m.

Assembly Tips
Pre-mounted hardware on all elements to facilitate and speed up assembly operations.
The feet, also pre-mounted on the plinths, allow the wardrobe to be levelled correctly thanks to a maximum extension of 0,8 cm. In the unloaded position, they measure 0,5 cm.

The following is necessary to assemble the structure::
- 4 cm in width
- 4 cm in height

Read more...
Honeycomb sandwich panel: this is a panel made with an internal honeycomb structure and a 5 / 7 cm perimeter frame in first choic solid fir closed with two 0,3 / 0,4 cm thick MDF panels, subsequently lacquered or veneered.
The strengths of honeycomb sandwich panels are:
- greater durability over time;
- greater load resistance;
- considerably reduced weight of the panels (up to 60% less), which is useful for transport, assembly, moving or removals, but above all to reduce the witht of the doors on the structure and hardware;
- hardware always fixed on the perimeter (in solid fir) of the sides and doors, so the hinges will have greater resistance and the furniture will have a considerably longer life;
- better resistance to humidity, as the material "breathes";
- exclusively "100% Made in Italy" product.
Aged Oak: compared to "standard" open pore oak, aged oak is characterised by its slightly more brushed surface, which shows a deeper pore and more evident grain. This difference is more noticeable on important surfaces such as tables, wall units and wardrobes, less so on accessories, beds and bed sets.

Video

Additional Information

Area of Production
Italy

Approximate Time
9 - 12 working weeks for production

Assembling
Medium Assembling

Cubic Metres
from 0,59 to 1,53 m³

Other Products from the same Collection
View all the products of the collection (cod.olv)

Partner Factory

This piece is made by a prestigious Italian company which has operated within the furniture industry since 1929. The company began as a carpentry workshop, before transforming into a furniture factory in 1949. Over the years, thanks to collaborations with well-known architects and designers, it has acquired fame at both a national and international level. The headquarters are located in Emilia Romagna, but the company is now recognised and valued in over 50 countries around the world.
True to their roots, the company catalogue centres around high-quality, modern furniture and accessories which are mostly made from wood. In particular, there are several pieces of furniture featuring skilfully-crafted wooden facades and doors with pleated details, consisting of vertical slats arranged in a regular pattern. The catalogue reflects modern trends and ways of living, offering customisable and durable options for every room of the house. Furniture solutions for the living room include wall units, tables, sideboards and cupboards. The bedroom furniture range features numerous models of wardrobes, beds and storage units.
As well as furnishing private homes and villas, this prestigious ‘Made in Italy’ company is committed to the design and manufacturing of quality contract furniture, particularly for hotels, showrooms, housing complexes and renowned offices around the world.