Materials Specifications
Top, bottom, back panels: made of E1 class particle wood panels with low formaldehyde emissions.
Side panel: made of E1 class particle wood panels with low formaldehyde emissions or with aluminium frame painted with epoxy powders.
Technical Specifications and Equipment
Side: 2,5 cm thick.
- version with Panel:
with ABS edge, including adjustable feet inserted inside the panel thickness, adjustable by 1,5 cm.
- version with Metal Frame:
in aluminium with 45 x 25 rods in finishes brown or titanium matt lacquer. They include adjustable feet inserted inside the frame thickness, adjustable by 1,5 cm.
Top and bottom: cm 3,5 thick. ABS edge matching the inside.
Back panels: cm 0,8 thick matching the inside.
Corner internal shelf: cm 3,5 thick. ABS edge matching the inside.
Bars for clothes hangers: rectangular section cm 3 x 1, in Titanium painted metal (for natura loto, linen textured or dark elm inside finish) or Brown (for taupe loto, terra loto or dark elm inside finish).
Usable internal height:
- for cm h.223,6 walk-in closet: cm 216,6
- for cm h.239,6 walk-in closet: cm 232,6
- for cm h.255,6 walk-in closet: cm 248,6
- for cm h.287,6 walk-in closet: cm 280,6
Side Holes
- version with Panel:
holes made every 9,6 cm.
- version with Frame:
the racks for the metal frame have gaps each 3,2 cm corresponding to the holes of the wooden sides/partitions.
For specific measurements we recommend to have a look at the scheme in the picture gallery.
Assembling Tips
For the assembling of the structure you need:
- cm 3,5 in width
- cm 2 in height (cm 5 in case you selected LED bars, to place the power supply on the top)
In cm d.43,5 walk-in closets, at least 2 compartments are equipped with an anti-tip hook to be fixed to the wall. In cm d.59,5 at least one compartment comes with anti-tip hook which can be used if needed. The anti-tip plate comes with spacers that allow the use when in presence of a skirting board with a max. thickness of 15 mm.