Lemming
Tufted Bed

Models and Specific Measurements
Bed Base:
- single: cm 107 h.34
- large single: cm 137 h.34
- French double: cm 157 h.34
- standard double: cm 177 h.34
- king size: cm 197 h.34

Technical Specifications and Equipment
Slatted Base: 68mm thick slats made of steamed beech plywood bent by warm with low formaldehyde emission. The slats are connected to the metal frame with silicon rubber mounts. The steel frame is at square section mm 40 x 30. Painting with epoxy powders.
Structure: fir solid wood and/or caged in multi-layer poplar wood. 18/25 mm thick panels made of particle poplar wood in E1 class of low and natural wood fibre.
Filling: crushproof polyurethane foam with different firmness, density from 18 to 40 Kg/m³. First layer made of polyester foam joined with grabbing interline made of polyester and/or batting polyester at 100% of 200 gr.
Headboard back: covered in the same material of the frontal headboard
Storage Box: 12-14 thick panels made of particle poplar wood in E1 class.
Simple lift-up mechanism:  traditional mechanism certified and tested up to 5.000 cycles, allows you to lift the bed base at 45°. Metal structure painted in epoxied powders with gas springs set on mattress weight.
Double lift-up mechanism: tested up to 4.000 cycles with assisted mechanism, allows you to lift the bed base at 45° and then raised it flat at a convenient height (m h.1). In this way, you can access the box easily and don't have to bend over the bed to make it or get into uncomfortable positions. Metal structure painted in epoxy powders with gas springs set on mattress weight.

Feet:
Basic standard: n.4 feet in regenerated or recyclable polypropylene, available in wengé, black, white or silver. 3 cm height.
Lux: n.4 "L" shaped feet composed by two pieces cm 18 x 18 h.3. Available in natural beech painted in wengé, black, matt white or chrome.

Optionals
Remove slatted base: you can purchase a bed without bed base only for the models without storage box
Corner supports set:  available for the models with slatted base without mechanical systems and without storage box. It gives the possibility to control slatted base's height for a more or less recessed mattress.
Clean Up System: it is a mechanism that allows you to lift the storage bed models and move the whole structure, without effort, by operating two hidden levers assembled on the sides of the bed frame. In this way, 4 no-marks rubber casters lower down and the whole bed is raised of cm h. 13 and can be move back and forth effortlessly. When the levers are lowered down, the casters disappear and the bed rests again on its feet. Easy, handy and safe.

Assembly Tips
Easy to assembly, with useful instructional sheet with maintenance advice.
Storage beds with covered headboard are delivered with an already fixed mechanism and they come with the Catas Italian quality certification.