Grevy
Upholstered Bed with Storage

Grevy bed with built-in storage is raised off the ground with tall legs, available in several finishes. Curved headboard with mobile side-wings.

* Required Fields


From €1,013.10
Wishlist

Description

The Grevy bed features built-in storage and a curved headboard. The bed is raised off the ground by tall legs, which are available in several different finishes or is also available in the Smart model without legs. Grevy comes in many sizes, such as single, large single, french double, standard double and king size, so can accommodate any bedroom. The entirely removable upholstery comes in either fabric, velvet or faux-leather. The most distinguishing feature of this bed is the curved headrest with wings on each side, which are easily adjusted thanks to the hinge at the back. The structure is framed by a raised trim, either matching or in contrast with the upholstery, highlighting the quality craftsmanship.
Grevy is also available with a manual 'Clean Up System' which allows the bed to be pulled upwards, making it easier to clean underneath. There is also the option to include a fabric storage caddy which fastens to the side of the bed.

Characteristics
unique headrest with curved, adjustable wings on either side
various models and sizes to choose from
padded structure with upholstery in either fabric, velvet or faux-leather
two models available; with tall bed frame or with legs
elegant, raised trim - either matching, or in contrast with, the upholstery
models without built-in storage box - option of mechanism to adjust height of base

Models and Measurements
Models: single, large single, french double, standard double, king size or super king size
Width and Depth of Headboard: please see all available sizes in the Configurator above
Headboard Height: cm 107
Width of Side Wings: curved - from cm 28 to 37

Materials and Finishes
Upholstery:
-fabric, velvet, faux-leather (completely removable)

Purchase Information
Mattress not included. A suitable mattress can be found in our Mattresses section: The mattress should have the same measurements as the base.

Technical study

Model and Specific Measurements
Bed Frame:
- single: cm 105
- large single: cm 135
- french double: cm 155
- standard double: cm 175
- king size: cm 195

Bed Frame Height:
- from the ground: cm 34
- Smart: cm 31 (+ 3 cm for the legs)
- York: cm 21 (+ 13 cm for the legs)

Headboard Depth: cm 7

Technical Specifications and Equipment
Bed Base: 68mm thick slats made of steamed beech plywood, bent with heat, with low formaldehyde emission. The slats are connected to the metal frame with silicon rubber mounts. The steel frame is a square section of 40 x 30 mm. Painted with epoxied powders.
Structure: fir solid wood and/ or caged in birch plywood. 18/25 mm thick panels made of particle birch wood in E1 class of low and natural wood fibre.
Filling: crushproof polyurethane foam with different firmness, density from 18 to 40 Kg/m³. The first layer is made of polyester foam joined with grabbing interliner made of polyester and/or batting polyester at 100% of 200 gr.
Storage Box: mm 12-14 thick panels made of particle birch wood in E1 class.
Simple Lift-up Base: traditional mechanism certified and tested up to 5.000 cycles, allows you to lift the bed base at 45°. Metal structure painted in epoxied powders with gas springs set on mattress weight.
Double Lift-up Base: tested up to 4.000 cycles with assisted mechanism, allows you to lift the bed base at 45° and then raised it flat at a convenient height (m h.1). In this way, you can access the box easily and don't have to bend over the bed to make it or get into uncomfortable positions. Metal structure painted in epoxied powders with gas springs set on mattress weight.

Legs:
Basic standard: n.4 legs made of regenerated or recyclable polypropylene, available in wengé, black, white or silver. Height cm 3.
Lux: n.4 L-shaped legs for overall sizes of cm 18 x 18 h.3. Available in varnished, natural beech in wengé, black, matt white or chromed.
Twinny: n.2 ‘double-stiletto’ legs in glossy chrome, glossy carbon look or matt black. Height: cm 13.
Baobab:n.2 legs in solid wood, available in natural oak, tobacco oak or London oak. Height: cm 13.

Optional
Remove the Bed base: you can purchase the bed without bed base - only for the models without a storage box.
Set of Angular Supports: available for models with mechanical bed base or without bed base. The supports allow you to adjust the height of the bed base and have a mattress that is deeper or slimmer than the bed frame. The three possible heights are cm 5, cm 6 and cm 12.
Clean Up System: is a mechanism that allows you to lift the 13cm high storage bed models and move the whole structure, without effort, by operating two hidden levers assembled on the sides of the bed frame. In this way, 4 no-marks rubber casters lower down and the whole bed is raised of cm h. 13; can be moved back and forth effortlessly. When the levers are lowered down, the casters disappear and the bed rests again on its feet. Easy, handy and safe. Only available for the Smart bed frame model.
Storage Caddy: an elegant, convenient and useful solution that is applied to the bed frame with Velcro. The caddy is divided into different compartments so you can store magazines, books, tablets, mobiles, headphone or glass cases.

Assembly Tips
Easily assembled. Assembly and maintenance instructions provided.The bed is delivered with the mechanisms already fastened onto the side rails of the bed, for the storage beds, and the covered headboard. Provided with Catas certification, the Italian institute for certification, research and tests in the wood furniture and industrial field.

Video

Additional Information

Area of Production
Italy
Warnings
Not exportable to the United Kingdom, EIRE and USA.
Assembling
Easy Assembling
Assembling Instructions
Download the Assembly Instructions
Cubic Metres
da 0,7 a 1,2 m³
Other Products from the same Collection
View all the products of the collection (cod.fls)

Partner Factory

This product is manufactured by a company set in Friuli region (Northern east of Italy) specialised in the production of upholstered product for more than 20 years. Their catalogue gathers padded items for the sitting and bedroom such as linear sofas, corner sofas or sofas with chaise longue together with single or double beds in fabric, velvet or faux-leather. The wide variety of products and the several covers available make these products highly bespoke.

The production is entirely made in Italy by the hands of skilled artisans that work at the same time with an industrial perspective by using modern techniques and high quality materials: from microfibres to natural yarns like cotton, linen, stain-resistant fabrics, fireproof or flame-retardant. This company belongs to Livenza furniture district certified by Emas which guarantees eco-friendly manufacturing procedures.

Valuable sofas and upholstered beds

You may also like