Frame Recessed
Bathroom Vanity

Material Specifications
Structure: 1.8 cm thick particle board panels, then lacquered or veneered with vertical grain.
Fronts: doors, drawers and baskets made of 1.9 cm thick MDF panels in the lacquered version, while they are made of 2 cm thick particle board in the veneered version with horizontal grain.

Technical Specifications and Equipment
Structure: characterised by a free back for the passage of drains.
Drawers / Legrabox drawer: equipped with a metal frame characterised by straight sides both internally and externally, only 1.28 cm thick. Full-extension runners and slow-closing mechanism.
Doors: fitted as standard with Smoove hinges that allow slow closing.
Handles: you can choose from various models of handles, as well as push-pull opening.
Handles codes 152 and 701 are available in a matt lacquered finish in all sample colours.
The handles mod. 68- protrude 4 cm from the surface of the door, while the 703 handles protrude 3 cm.
Feet cm h.10: with rectangular or shaped section, available in chrome, satin nickel, black lacquered, matt lacquered or sandblasted lacquered metal in all sample colours; the wall-hung base unit cm h.75 thus becomes a floor-standing unit 85 cm high (excluding the height of the washbasin and thickness of the top).
Feet cm h.12: with a square section available in satin nickel metal, matt lacquered or sandblasted lacquered in all the colours of the sample collection; the wall-hung base unit cm h.75 thus becomes a floor-standing unit cm 87 high (excluding the height of the washbasin and thickness of the top).
Plinth cm h.6 / 10 / 15: in aluminium or sandblasted lacquered in all the colours of the sample collection; the wall-hung base unit cm h.75 thus becomes a floor standing unit cm 81 / 85 / 90 high (excluding the height of the washbasin and thickness of the top).

N.B. The faucet hole has a standard diameter of 3.5 cm.
For washbasins without an overflow hole, the use of a continuous drain is recommended.

The indicated dimensions of all ceramic washbasins may vary in size (specifically by approximately 0.8%) due to wear and tear on the moulds or small variations in the technical characteristics of the materials making up the mix.

Optional
splashback: designed to complete bathroom furniture with marble-stone, stoneware, quartz-resin, HPL or Minera-Kolor tops; particularly suitable for walls that are not perfectly square and for combination with free-standing mirrors.
Organiser: internal partition system for Legrabox drawer and basket. Available in Canaletto Walnut and Orione finishes.

Maintenance Tips
Veneered: use neutral liquid detergents for cleaning. To remove limescale stains, wipe the top with a sponge soaked in vinegar or anti-limescale product, then rinse and dry. Do not use acids, abrasive products or powders; do not leave limescale-removing products in contact with the top for a prolonged period of time, as this could create halos.
Layered HPL: for maintenance, the top must be cleaned with a soft, damp cloth, without scrubbing in order not to scratch or abrade the top. We recommend the use of neutral detergents. Do not use abrasive or scratching substances, strong acids or salts, metal cleaners and concentrated limescale removers. Avoid contact with boiling water, avoid using steam cleaners.
Lacquer: use soft, non-abrasive cloths for cleaning to avoid damaging the surface. Do not use products containing solvents, acetone or abrasives, nor wax, alcohol or silicone-based products.
Wood: "living" material protected superficially by varnish; for cleaning, use a soft, non-abrasive, damp cloth well wrung out. It is recommended to clean the top in the direction of the grain and dry carefully.
Stone: to prevent stains, clean promptly with a damp cloth or neutral detergents. The use of neutral detergents is recommended.
Minera-Kolor: to remove most dirt and stains, powder detergent combined with an abrasive sponge or a common chlorine or bleach cleaner is sufficient. For the removal of stains caused by limescale, the use of a common limescale remover is recommended. To maintain the original opacity of the artefact occasionally clean with amuchina or a 1/20 solution of bleach diluted in water. To enhance the typical satin opalescent finish, occasionally wipe with an abrasive sponge, applying a circular motion.
QTOP: unlike marble-resin, the mineral filler is not chemically attackable by acids. The products recommended for cleaning must not have a high alkalinity (basic pH) that could alter the binding resin, mainly from an aesthetic point of view. The best way to prevent stains is to remove the soiling in good time with a damp cloth or neutral detergents before they harden.

Read more...
Porcelain stoneware : Porcelain stoneware is made from a mixture of water and clay that is transformed, through the raw extrusion process, into a slab with extraordinary mechanical properties. Vitrification closes the pores, ensuring maximum resistance to water absorption and stains.
QTOP: is a quartz-resin product consisting of natural materials (quartz and granite) and a high-quality binding agent, supplemented with coloured pigments and glass or mirror granules.
Minera-Kolor: it is composed of natural mineral fillers (calcium carbonates and aluminium trihydrates) bound by a low percentage of polyester resin: a material that is therefore elegant to the touch, hygienic and suitable for bathroom furnishings. The technical enamel that covers the surface of the material is matt coloured, with excellent physical and chemical resistance. It is resistant to boiling water and temperature changes. Any colour variations that have arisen through use can be easily removed by simple cleaning, using a lightly abrasive sponge in a circular motion.