Material Specifications
Structure: made from wood particles (class E1= low formaldehyde emission) or MDF.
Technical Specifications and Equipment
Shelf (cm d.51,5): 3,5 cm thick. Complete with metal brackets, it can be positioned at a minimum height of 8.4 cm from the ground. Can be equipped with LED bar lighting. Maximum load-bearing capacity is evenly distributed at 25 Kg per linear metre.
Shoe-rack shelf (cm d.51,5): 3,5 cm thick, complete with brackets and 1 or 2 metal heel plates, can be positioned at a minimum height of 8,4 cm from the ground. Can also be equipped with an LED lighting bar. Maximum load-bearing capacity is evenly distributed at 25 Kg per linear metre.
LED bar for shelf: 3000 K warm light placed under the milled linear shelf in the front. Electricity is transmitted by means of contact between the bracket, non-oxidisable for electrical conduction, with the electrified rack edge (by means of an internal gasket). The electrified rack is equipped with a power cable that must be connected to the transformer, which is positioned in the space between the panel and the wall. To electrify the compartment, both rack edges must be electrified. The lights are switched on by remote control.
Clothes rail: made in moka shine painted extruded aluminium. Complete with a seal at the top to be fixed to the shelf. Maximum load capacity is evenly distributed at 15 Kg per linear meter.
Scarf rail: moka shine painted extruded aluminium. Only available for cm 95,2. Maximum load capacity is evenly distributed at 10 Kg per linear metre.
Desk (cm d.51,5): 3,5 cm thick with custom width. Side and intermediate brackets (one for each rack, in the case of a desk on several panels). Visible edge in wood, lacquered ABS or ABS. To calculate the width of the desk, one must add the width of each back panel and the 0.4 cm space between each back panel. The desk can be positioned freely at any height (max. recommended height is cm h.88,7). If a desk is placed on top of a drawer unit, the top of the drawer unit will be replaced by the desk. Maximum load capacity is evenly distributed at 25 Kg per linear metre.
Open wall unit (cm d.40): cm 31,4 with a 1,4 cm-thick structure and a wooden, lacquered ABS or ABS edge. Complete with metal brackets, can be positioned at a minimum height of 2 cm from the ground. Maximum load-bearing capacity is evenly distributed at 30 Kg per linear metre.
Shirt cubby unit (cm d.40): cm 75,2 / 95,2 with 1,4 cm-thick structure and wooden, lacquered ABS or ABS edge. Complete with metal brackets, can be positioned at a minimum height of 2 cm from the ground. Open compartments can be equipped with fabric-covered storage boxes cm h.8,8 / 15 (for the cm 95,2 shirt cubby unit they are in the central compartments). Maximum load-bearing capacity is evenly distributed at 30 Kg per linear metre.
Drawer unit / Shoe-rack drawer (cm d.51,5): complete with metal brackets, can be positioned at a minimum height of 2 cm from the ground. Top panel, side panels, shelves are 3,5 cm thick. Bottom panels, under-top panel are 1,8 cm thick. Back panel is 0,6 cm thick. Front panels are 2,2 cm thick. Drawers equipped with concealed guides with vertical adjustment integrated into the connection with assisted, partial or total extraction. Maximum load-bearing capacity is evenly distributed at 30 Kg per linear metre.
Wooden front panel: T16 handle in moka shine painted metal (cm 19 d.3,3 h.0,8) or a knob handle in moka shine painted metal and grey hide leather (cm 4,1 d.1,6 h.4,1). The internal section (sides and back) is made from particle wood panel covered in grey polymer leaf. Shoe rack in gunmetal melamine.
Clear grey glass front panel: T16 handle in moka shine painted metal (cm 19 d.3,3 h.0,8). Frame and internal section (sides and back) in gunmetal melamine.
Pull-out accessories (cm d.51,5): cm 95,2, complete with metal brackets. Top panel, side panels, shelves cm th.3,5. Bottom of tray cm th.1,4 matching the structure. Back panel cm th.1,8. Drawers equipped with concealed guides with vertical adjustment integrated into the connection, with assisted closing. Maximum load-bearing capacity is evenly distributed at 30 Kg per linear metre.
Tray: frame in smoky grey aluminium cm h.11. Available in models with 1, 2 or 3 pull-out trays (cm h.19,5 / 32,3 / 45,1).
Trouser rack: frame in smoky grey aluminium cm h.5. Single pull-out trouser rack or with an upper pull-out tray (cm h.19,5 / 32,3).
Skirt hanger: frame in smoky grey aluminium cm h.5. Single pull-out skirt hanger or with an upper pull-out tray (cm h.19,5 / 32,3).
Floor platform (cm d.51,5): custom width in melamine, matt lacquer, open-pore matt-lacquer oak wood veneer, and fashion wood. 3,5 cm thick with with levelling feet (cm h.1,7). Visible edge in wood, lacquered ABS or ABS.
Brackets: in moka shine painted metal (0,3 cm thick) for mounting onto rack.
Optional - Custom Reductions
custom width:
- open wall unit (min cm 14,8);
- linear shelf, LED bar and clothes rail (min cm 16);
- drawer unit with wooden fronts and a shoe-rack deep drawer (min cm 28);
- shirt cubby unit cm 75,2 (min cm 28,2): reduction on both compartments in equal measure;
- shirt cubby unit cm 95,2 (min cm 64,5): reduction only on the the external compartments, in equal measure.
