Optional
Chute: for stoneware bathtubs, it is available as an option and is removable with a thickness of approx. 6 mm (variable depending on colour), while it is integrated with a thickness of 10 mm for layered bathtubs; the top is smooth without a hole for a drain, with water drainage on the edges.
The slide is inclined, with a height from the bottom of the tub of approximately 4 cm towards the outside and approximately 2 cm towards the masonry.
Splashback: designed to complement bathroom furniture with stone, Qtop, stoneware, HPL or resin tops; particularly suitable for walls that are not perfectly square and for combination with free-standing mirrors.
Maintenance Tips
Layered HPL: for maintenance it is necessary to clean the top with a soft, damp cloth, without scrubbing in order not to scratch or abrade the top. We recommend the use of neutral detergents. Do not use abrasive or scratching substances, strong acids or salts, metal cleaners and concentrated limescale removers. Avoid contact with boiling water, avoid using steam cleaners.
Stoneware: To prevent stains, clean promptly with a damp cloth or neutral detergents. We recommend the use of neutral detergents.
Tekor: for maintenance, use soapy water or common mildly abrasive detergents with a cotton cloth or mildly abrasive sponge, taking care to rinse the surface well. Avoid very hot objects, very aggressive acids or combinations of solvents. Any damage can however be repaired by a specialised craftsman.
Mineralguss: for cleaning, use a sponge with water and a normal cream detergent. The surface of the top must not be in contact with solvents and alkaline lotions such as ammonia. Hair dye products must not stagnate in the basin and must be rinsed off immediately. Never fill the basin with hot water above 60°C.
Corian®: Soapy water or common ammonia-based detergents are sufficient for maintenance, taking care to rinse the surface thoroughly. Avoid contact with chemicals or solvents, in which case please rinse the surface immediately with running water. Nail polish should be removed with a non-acetone nail polish remover and then rinsed with water. Minor damage, including scratches, stains including from chemicals, burn marks and small impact nicks, can be repaired directly using the Scotc Brite abrasive sponge.
QTOP: unlike marble-resin, mineral filler is not chemically attacked by acids. the products recommended for cleaning must not have a high alkalinity (basic pH) that could alter, mainly from an aesthetic point of view, the binding resin. The best way to prevent stains is to remove them promptly with a damp cloth or neutral detergents before they harden.
Read more...
Porcelain stoneware : Porcelain stoneware is made from a mixture of water and clay that is transformed, through the raw extrusion process, into a slab with extraordinary mechanical properties. Vitrification closes the pores, ensuring maximum resistance to water absorption and stains.
Tekor: a mineral compound coated with a resin film that provides both physical and chemical resistance.
Mineralguss: a material composed of calcium carbonates and aluminium trihydrates, bound by a low percentage of polyester resin. The surface is coated with a gelcoat film that offers excellent physical and chemical resistance. The compound is ductile and heat resistant. Any colour variations caused by high temperatures can be removed by cleaning with a lightly abrasive sponge and subsequent polishing.
Corian®: non-porous, homogeneous, inert and non-toxic material, available in 12 mm thickness, consisting of approximately 1/3 acrylic resin (also known as polymethyl methacrylate or PMMA) and approximately 2/3 natural minerals. The main mineral is aluminium trihydrate (ATH) derived from bauxite, a mineral from which aluminium is also obtained.
Because it is non-porous, Corian® surfaces are particularly hygienic, which is why it is used to make kitchen worktops, vanity tops, walls for bathrooms and showers, wall tiles and counters for public spaces such as healthcare, shops, hotels, restaurants and offices.
QTOP: is a quartz-resin product consisting of natural materials (quartz and granite) and a high-quality binding agent, supplemented with coloured pigments and glass or mirror granules.
