Technical Specifications
Structure: made with panels 1,5 cm thick. The horizontal panels are joined to the vertical lateral ones with a 45° joint with a 2x2 mm "wire breaker".
Grain Direction: for the perimeter structure and the backrest the direction of the grain is "running".
Maximum Load Capacity: the support surfaces are intended to contain normal objects (equal to 25 kg per square meter) uniformly distributed up to a maximum of 65 kg. For loads exceeding 25 kg per square meter it is recommended to use single elements 45-60 cm wide.
Vertical Adjustment: the hangers supplied allow an adjustment of 1,2 cm horizontally and vertically, and 1 cm in depth.
Optional
Internal Divider: lacquered metal divider element, thickness cm 0,4 or clear glass, thickness cm 0,8. The internal dividers are simply placed inside the compartments, to facilitate positioning it is supplied with a velcro fastening system to the back panel.
Lighting: LED bars positioned either on a single side or on both sides, initial and final side with power supply included. Vertical 3000K LED bar with development from 2W to 24,8W max depending on the size and number of bars present. Switched on via connection to the home network or with an optional remote control.
To know more...
Laminate: it is a wood-effect coating usually applied to different materials, such as melamine panels. This covering consists of layers obtained by pressing together various sheets of paper soaked in melamine or phenolic resins. There are different types and aesthetically it can have different aspects, such as the features of real wood.
Cleaning and Maintenance
The surfaces must not be placed in contact with water, liquids in general, excessive heat and humidity.
Cleaning should be carried out exclusively with a damp cloth and neutral detergents, drying immediately with a soft cloth; The use of alkaline, solvent and abrasive products is not recommended. The products are not suitable for external use.
